Kehua 5 Ton Indcution Melting Furnace for Aluminum Ingots Casting

Product Description

Product Description

5 ton induction melting furance is a model of our electric coreless induction melting furnaces with a furnace body capacity of 5 tons for Iron Steel Copper Aluminum Alloy Metals Melting.Generally we produce induction melting furnaces by capacity from 50kg to 50 tons based on requirement. 

We can supply with two specific types for this 5 ton model by Parallel Resonant Inverter and Series Resonant Inverter. Each type will have a stable working system, continuouse safety operation, efficient production capacity and low power consumption.

If you want to have one power supply to support more than 2 set furnaces, then we can also provide the solution, togheter with power factor above 95%.

Customers will make a best effective choice based on single own situtaion.

Detailed Photos

     Steel Shell melting furnaces with open fram structure, both for stable foundation and friendly maintenance.

 

 

Product Parameters

GW-5.0T-3500KW/0.3S melting furnace

Sr. No.	Description	Rating
1.	Transformer total Input capacity (KVA)	3600
2.	Total Rated Power (KW)	3500
3.	Input Power Factor	0.95
4.	Input Voltage (Volts)	660
5.	Rated Frequency (Hz)	300
6.	Medium Frequency Voltage (Volts)	2800
7.	Melting Temperature (°C) for steel	1650
8.	Melting Temperature (°C) for cast iron	1450
9.	Melting time for steel (Minutes)	60±5
10.	Melting time for cast iron  (Minutes)	50±5
11.	Nominal capacity of furnace (kg)	5000
12.	Maximum capacity of furnace (kg)	6000
13.	Melting Rate for steel at 1650° C at 3500KW (Kg/Hr)	5000±5%
14.	Melting Rate for cast iron at 1450° C at 3500KW (Kg/Hr)	5000±5%
15.	Energy consumption per ton for steel	620KW.H±5%
16.	Energy consumption per ton for cast iron	560KW.H±5%
17.	Control method: Intelligent PLD power control system	Yes
18.	Multi-protections: over current, over pressure or under pressure, water pressure, phase loss, furnace leak alarm and water temperature alarm	Yes
19.	Cooling water inlet pressure(MPa)	0.2
20.	Cooling inductor water temperature at the entrance (°C)	5-35
21.	Cooling inductor water temperature at the exit     (°C)	≤55

Configuration-5.0T-3500KW/0.3S melting furnace  

Item	Product Name		Model	QTY	Unit
1	Medium frequency dual power supply cabinet	Series resonance power supply	KGPS-CL-3500-1S	2	Set
		reactor	DK-3500	2	Set
		Filter capacitor cabinet	KH-3500KW-LB	2	Set
		Series capacitor cabinet	KH-3500KW-XZ	2	Set
		Red copper bar	T2(Power supply to capacitor cabinet)	2	Set
		Intelligent diagnosis system	PLC+ touch screen+mobile phone monitoring	2	Set
2	Furnace body system	5.0T Furnace body     (steel Shell with yoke)	Including furnace frame, hydraulic cylinder, sensor, inner side coating insulation Margin mortar,	2	Set
3		Cyclone dust suction  hood	XF5000	2	Set
4		Safety guardrail	KH-5000	2	Set
5		Hydraulic pumping unit without oil	With high pressure tubing (Double pumps, one used and one prepared)	1	Set
6		Power supply external operating console	KH-5000	2	Set
7		Tilting control console (Control Hydraulic Tilting, Lining Leakage Alarm)	Including leaking furnace alarm, hydraulic control system	2	Set
8		5.0T steel  mold	For 5.0 ton capacity	2	Pcs
9		Water Cooled Cable	T2 Red copper      ( 2 pcs/set)	2	set
10	Cooling system	Internal Circulation Closed water Cooling System	FL-1500 Circulating water flow 100M^3/h For cooling Power Supply FL-3000 Circulating water flow 130 M^3/h For cooling Furnace bodies 2 sets water pumps for Auxiliaries, one for use and the other for standby	2	set

Certifications

We understand that no two customers are identical and each customer has unique requirements. With decades of global experience, our team will listen carefully to understand your requirements and propose a solution custom configured to satisfy your unique needs.
 

 

Packaging & Shipping

                     We provide qualified packing solution to avoid any potential rik or damage during transportation and loading process.

 

Company Profile

Kehua is a professional manufacture of electric medium frequency induction furnaces, including melting furnace/diathermy furnace/vacuum furnace and heat treatment equipment for casting and forging industry.

A whole completed line of heating systems, including cooling projects, billets automatic loading and digital control casting pouring procedures, together with kinds of technical improvements are we have been working on for almost  30 years to provide our customers with continuous satisfaction.

With more successful solutions and rapid response, we have the ability and passion to povide a genuine programme based on your requirements.

Our Advantages

1. The latest development of intelligent full digital motherboard, debugging only need to set and calibrate parameters on the touch screen, truly digitized, do not need to adjust the potentiometer on the motherboard, making debugging easier. During operation you can set the screen power, you can also use the potentiometer to adjust the power, this function conversion can be achieved on the screen through the software setting. Make the device run more stable.
2. Providing with High cost performance and quality of imported equipment, with the domestic mid-end price, with a perfect protection system.
3. The water pressure data of the power supply and furnace body are collected and stored in the PLC system in real time, and the alarm is set on the touch screen.
4. The power supply part of the reactor, rectifier, inverter, filter, resonance and other parts of the backwater are installed temperature detection, the problem of the waterway branch has a light-emitting diode indication, and in the touch screen and mobile phone real-time indication of the fault appears in that part, the serious fault directly causes the power to stop running.
5. Detect the water level in the closed water cooling system, and immediately stop the alarm when it is lower than the set position.
6. The power, DC current, IF voltage and if current of each set of equipment are protected in real time. If the set value is exceeded, it will be automatically adjusted immediately, and the protection will be stopped in time.
7. The inverter signal is transmitted by optical fiber: compared with the traditional electrical signal transmission, it is more resistant to electromagnetic interference, and is not affected by mid-frequency electromagnetic interference, so that the equipment can be operated stably.
8. The leakage discharge or injection protection system of the equipment collects the leakage current data through PLC, and quickly judges the furnace leakage alarm and stops according to the leakage current, so as to realize the protection before the furnace body leakage. And can query the previous leakage current data to judge the condition of the furnace
9. he equipment circuit breaker adopts intelligent circuit breaker: it has sensitive overload trip protection and short circuit instantaneous trip protection function than the mechanical circuit breaker, and can quickly trip protection in the short circuit state at the back end to prevent the transformer from short circuit overload.
10. The reactor uses an empty core reactor and uses epoxy resin for pouring, which makes the sound quieter during operation. Conductive copper pipe adopts thick wall, large inner diameter copper pipe, lower heat, not easy to scale, long service life.
11. The 81 type water jacket is adopted, which has large size, large conductive cross section, low heat output, and larger water cavity of the water jacket, which is less prone to fouling and blockage, and has better cooling effect on the thyristor.
12. Inverter thyristor adopts KF asymmetric thyristor, because of the different structure of the PN junction inside the thyristor, the positive and negative voltage withstand values of the thyristor are also different, and the reverse PN junction is therefore lower in heat, so compared with the previous KK thyristor loss, higher temperature resistance characteristics, and longer life. However, because of the PN structure, KF thyristors can only be used in series inverter equipment.
13. In series resonant inverter one power supply tows multi furnaces system, the total power can be freely distributed, multiple devices do not affect each other, and the total power does not exceed the total transformer load.
14. The equipment realizes constant power output according to the set power, which has more advantages for long-term insulation, can ensure that the set insulation power is constant, improve the utilization rate of the transformer, and save the loss of the basic electricity cost for the user.
15. All kinds of equipment information is stored in the memory, and the data can be tested to the computer, which is easy to query and analyze the fault information in operation, and improve the stability of the use of equipment.
16. The whole water cooling system uses stainless steel pipes and high-quality hose, and the water quality is maintained well, avoiding the ducking of each branch water pipe, reducing the failure rate and increasing the stability of the equipment.
17. Open frame furnace body, inspection, maintenance more convenient and rapid
18. The 0.3mm oriented silicon steel sheet is used to reduce the loss of the magnetic yoke and save power consumption. The induction ring has been simulated and tested for many times, and the equipment configuration is more reasonable. The anaerobic copper tube with a wall thickness of 8mm has low impedance of the induction ring and low loss, which is an important energy-saving measure.
19. The induction ring adopts porcelain insulation treatment, and the coil protection cement is poured inside and outside, which further improves the insulation of the coil and reduces the failure of the coil ignition caused by humid working condition.
20. The oil cylinder is installed with an anti-pipe burst valve. Once the oil pipe bursts, the oil cylinder is in a locked state or slowly falling to prevent malignant accidents. The hydraulic station adopts fireproof glycol based grease to prevent fire accident.
21. The quality of our products is stable and reliable, in order to provide customers with more satisfaction, we guarantee warranty period within 2 years.
     

FAQ

After sale service:
1.Quality Guarantee: 1 year.
2.Commissioning: We send technicians to the site for instructing installation and commissioning .
3.During the warranty period, provide accessories, free of charge .
4.After the warranty period, provide accessories at most favourable cost in time and guide installation and commissioning



Trade terms
1. Delivery Port : Qingdao 
2.Lead time:  30 days in low season, 60-90 days in peak season
3.Shipment: 20GP/40GP/40HC/40OT/Flat rack container,According to the situation
4.Payment terms: Optional
4.1)By T/T, 50% in advance , 50% balance before shipment
4.2)By T/T + L/C , 50% by T/T in advance , 50% by 100% irrevocable L/C opened by famous Bank
4.3)By L/C , 100% Confirmed irrevocable L/C opened by famous Bank